Chi i può aiutare a capire cosa è successo??? (forse il buon Romolan
- Ops!!! Romoloman) :
================================================== ===============================
AvviatoAVRDUDE
C:/Programmi/companion9x/avrdude.exe -c usbasp -p m64 -P usb -U flash:w:C:/open9x-stock-heli-templates-it.hex:i
================================================== ===============================
avrdude.exe: warning: cannot set sck period. please check for usbasp firmware update.
avrdude.exe: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.02s
avrdude.exe: Device signature = 0x1e9602
avrdude.exe: NOTE: FLASH memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude.exe: erasing chip
avrdude.exe: warning: cannot set sck period. please check for usbasp firmware update.
avrdude.exe: reading input file "C:/open9x-stock-heli-templates-it.hex"
avrdude.exe: writing flash (51746 bytes):
Writing | ################################################## | 100% 9.59s
avrdude.exe: 51746 bytes of flash written
avrdude.exe: verifying flash memory against C:/open9x-stock-heli-templates-it.hex:
avrdude.exe: load data flash data from input file C:/open9x-stock-heli-templates-it.hex:
avrdude.exe: input file C:/open9x-stock-heli-templates-it.hex contains 51746 bytes
avrdude.exe: reading on-chip flash data:
Reading | ################################################## | 100% 15.09s
avrdude.exe: verifying ...
avrdude.exe: verification error, first mismatch at byte 0x8001
0x01 != 0x00
avrdude.exe: verification error; content mismatch
avrdude.exe done. Thank you.
================================================== ===============================
AVRDUDEfatto - codice di uscita 1
================================================== ===============================
Grazie al buon samaritano che mi aiuterà!!!